Installation - Installing VolumeCheck

Packing list

• VolumeCheck instrument
• Flash drive containing the VolumeCheck software and the VolumeCheck manual
• USB cable (1)
• Power Cable (1)
• Rack adapters (per order)

VC100 & VC384 components

Instrument set up

1. Remove the Shipping Screws.
   1. The VolumeCheck models have two shipping screws; one on the back and one on the
      bottom of the instrument both marked with a red tag.
   2. Remove the foam insert.
   3. Save the shipping screws, red tags, and foam insert with the shipping crate for future
      shipping and relocation.
      Note: It is important that the shipping screws are removed before plugging in the
      VolumeCheck. Failure to do so may cause damage to the instrument.
2. Place your instrument on a vibration-free level bench top.
3. Attach the power cord to the VolumeCheck and a power outlet.
4. Attach a USB cable to the VolumeCheck and its computer.
5. Turn on the VolumeCheck using the power switch near the power connector.